Kingston Fury Beast 32GB (2x16GB) DDR5 4800MT/s CL38 Desktop Memory - KF548C38BBK2-32 Black
DDR5-4800/PC5-38400 DDR5 SDRAM - 4800 MHz - CL40 - 1.10 V - On-die ECC - Unbuffered - 288-pin - DIMM
Part Number: KF548C38BBK2-32
|
Sold Out!
|
OverviewSpecificationsWarranty
FURY
KF548C38BBK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-4800 CL38 SDRAM
(Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA
components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-4800 at a low latency timing of 38-38-38 at 1.1V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FEATURES
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.37” (34.9mm), w/heatsink
Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-4800 at a low latency timing of 38-38-38 at 1.1V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FEATURES
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.37” (34.9mm), w/heatsink
