|
|
FURY
KF548C38BBK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-4800 CL38 SDRAM
(Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit
FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP)
3.0. Total kit capacity is 64GB. Each module has been tested to run at
DDR5-4800 at a low latency timing of 38-38-38 at 1.1V. Additional timing
parameters are shown in the Plug-N-Play (PnP) Timing Parameters section
below. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
FEATURES
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.37” (34.9mm), w/heatsink
|
CL(IDD) 38 cycles |
---|
|
Row Cycle Time (tRCmin) Refresh to Active/Refresh 48ns(min.) |
---|
|
Command Time (tRFCmin) 295ns(min.) |
---|
|
Row Active Time (tRASmin) 29.12ns(min.) |
---|
|
UL Rating 94 V - 0 |
---|
|
Operating Temperature 0oC to +85oC |
---|
|
Storage Temperature -55oC to +100oC |
---|
|
Item Dimension (L inchxW inchxH inch) 7 x 4 x 1 Weight 1.00 lb Warranty Information Lifetime |
---|
|
|
---|
|
---|